1970 Plymouth Road Runner

In Progress
Page 1 2 3
Tail light panel is installed. Trunk drops are also welded in.
1/8" metal is welded to the fender and then ground down to obtain the proper gap width. The edge of the door has also been built up with weld and ground down.
The car body is completely assembled to align body panels and gaps. After everything is aligned careful measurments are recorded before taking it all apart. Actually the first applications of primer and block sanding will be done before disassembly.
The car is now at the priming and block sanding stage.
PAGE 1 2 3
Back to thumbnails
TOP